|Supported Calibers: ||5.56, 5.45 |
|Full Auto: ||Moderate |
|Minimum barrel length ||11.5 inches |
|Overall Length: ||6.5 inches |
|Diameter: ||1.5 inches |
|Weight: ||13.5 ounces |
|Core Material: ||Stainless Steel |
|Tube Material: ||Titanium |
|Finish: ||Natural Titanium |
|Threads: ||1/2-28 |
|MSRP: ||$599.00 |
Huntertown Arms warrants its suppressors for life against everything but stupid.
In addition, the Chameleon has a lifetime cleanability guarantee. If at any time you are unable to clean your Chameleon, send it to us and we'll clean it for free.Suppression
The Chameleon series of rifle suppressors provide low weight, hearing safe centerfire rifle silencers that can be easily maintained and repaired. They will not disappoint. Maintenance
Cleaning the Chameleon is a breeze. Centerfire rifle suppressors need to be cleaned and inspected, just like rimfire suppressors.
With the Chameleon full user servicability is truely a reality.
The Chameleon core is constructed of stainless steel for superior cleanability. You can use chemical solutions safe to stainless steel but that remove nasty lead deposits (the "Dip"). The core breaks down so that you can put it into a reloading tumbler, or use a bead blaster for fast and efficient cleaning. And unlike other monocore technologies, you can dip your Chameleon core without worrying about damaging the exposed finish on your core.
Chameleon baffles are fully encased for superior strength and to prevent lead and carbon buildup between the core and the tube, even after thousands of rounds fired. This provides for quick and easy removal of your core, without the hassle or need of pushers or other devices to remove it.
And as with all Huntertown Arms suppressors, all it takes to disassemble your silencer is a standard, box end, or crescent wrench, a bench vise, pair of pliers, or any other tool that can grab a standard socket. No special tools required. Ever. Longevity
There are several features designed into the Chameleon to ensure your safe and enjoyable use beyond a lifetime.
Most bullet strikes on a suppressor occur on the end cap. The Chameleon design separates the end cap from the registered part so that if there is an end cap strike it will be more likely your suppressor can be repaired or replaced without having to replace the registered part.
We are huge proponents of stacked bafle technology for another reason. With a monocore, there is only one blast baffle. When that blast baffle erodes, the core has to be replaced. This may or may not be a warranty repair, but in any event you have lost the use of your suppressor while it is at the manufacturer for repair.
Your baffles should be rotated (like tires) whenever the core is cleaned. With three baffles available to act as blast baffles, the Chameleon 5.56 will allow up to three times the number of rounds fired before re-coring. Safety
The Chameleon's Titanium exterior is fully protected by an inner stainless steel wall. In the event of an internal baffle strike, the inner core is strong enough to capture the damaged projectile and baffle material, protecting the tube as much as possible against catastrophic failure.